! ! OpenBSC (UNKNOWN) configuration saved from vty !! password foo ! log stderr logging filter all 1 logging color 1 logging print category 1 logging timestamp 0 logging print file 1 logging level all everything logging level rll notice logging level cc info logging level mm info logging level rr notice logging level rsl error logging level nm notice logging level mncc notice logging level pag notice logging level meas notice logging level sccp notice logging level msc notice logging level mgcp notice logging level ho notice logging level db notice logging level ref notice logging level gprs notice logging level ns notice logging level bssgp notice logging level llc notice logging level sndcp notice logging level nat notice logging level ctrl notice logging level smpp fatal logging level filter notice logging level lglobal error logging level llapd notice logging level linp notice logging level lmux notice logging level lmi notice logging level lmib notice logging level lsms debug logging level lctrl notice logging level lgtp notice logging level lstats notice logging level lgsup notice logging level loap notice logging level lss7 notice logging level lsccp notice logging level lsua notice logging level lm3ua notice logging level lmgcp notice ! stats interval 5 ! line vty no login ! e1_input e1_line 0 driver ipa e1_line 0 port 0 no e1_line 0 keepalive network network country code <%= @mcc %> mobile network code <%= @mnc %> short name <%= @network_name %> long name <%= @network_name %> auth policy <%= @auth_policy %> authorized-regexp .* location updating reject cause 13 encryption a5 0 neci 1 paging any use tch 1 rrlp mode none mm info 1 handover 0 handover window rxlev averaging 10 handover window rxqual averaging 1 handover window rxlev neighbor averaging 10 handover power budget interval 6 handover power budget hysteresis 3 handover maximum distance 9999 timer t3109 4 dyn_ts_allow_tch_f 1 subscriber-keep-in-ram 0 bts 0 type sysmobts description MasterBTS band <%= @gsm_band %> cell_identity 0 location_area_code <%= @lac %> base_station_id_code 63 ms max power <%= @ms_max_power %> cell reselection hysteresis 14 rxlev access min 0 periodic location update 30 radio-link-timeout 32 channel allocator ascending rach tx integer 9 rach max transmission 7 channel-descrption attach 1 channel-descrption bs-pa-mfrms 5 channel-descrption bs-ag-blks-res 1 rach emergency call allowed 1 early-classmark-sending forbidden early-classmark-sending-3g allowed ip.access unit_id 1000 0 oml ip.access stream_id 255 line 0 neighbor-list mode automatic <% if @mncc_codec == 'AMR' -%>codec-support fr amr amr tch-h modes 4 5 amr tch-h start-mode 1 <% else -%>codec-support fr <% end -%> <% if @gprs == 'active' -%> gprs mode gprs gprs 11bit_rach_support_for_egprs 0 gprs routing area 0 gprs network-control-order nc0 gprs cell bvci 2 gprs cell timer blocking-timer 3 gprs cell timer blocking-retries 3 gprs cell timer unblocking-retries 3 gprs cell timer reset-timer 3 gprs cell timer reset-retries 3 gprs cell timer suspend-timer 10 gprs cell timer suspend-retries 3 gprs cell timer resume-timer 10 gprs cell timer resume-retries 3 gprs cell timer capability-update-timer 10 gprs cell timer capability-update-retries 3 gprs nsei <%= @lac %>0 gprs ns timer tns-block 3 gprs ns timer tns-block-retries 3 gprs ns timer tns-reset 3 gprs ns timer tns-reset-retries 3 gprs ns timer tns-test 30 gprs ns timer tns-alive 3 gprs ns timer tns-alive-retries 10 gprs nsvc 0 nsvci <%= @lac %>0 gprs nsvc 0 local udp port 23<%= @lac %> gprs nsvc 0 remote udp port 23001 gprs nsvc 0 remote ip <%= @sgsn_ip_address %> <% else -%> gprs mode none <% end -%> no force-combined-si trx 0 rf_locked 0 arfcn <%= @arfcn_A %> nominal power 37 max_power_red <%= @max_power_red %> rsl e1 tei 0 timeslot 0 phys_chan_config CCCH hopping enabled 0 timeslot 1 phys_chan_config SDCCH8 hopping enabled 0 <% if @gprs == 'active' -%> timeslot 2 phys_chan_config TCH/F hopping enabled 0 timeslot 3 phys_chan_config TCH/F hopping enabled 0 timeslot 4 phys_chan_config TCH/F hopping enabled 0 timeslot 5 phys_chan_config TCH/F hopping enabled 0 timeslot 6 phys_chan_config TCH/F hopping enabled 0 timeslot 7 phys_chan_config PDCH hopping enabled 0 <% else -%> timeslot 2 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 3 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 4 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 5 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 6 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 7 phys_chan_config <%= @phys_chan %> hopping enabled 0 <% end -%> <% if @arfcn_B -%> bts 1 type sysmobts band <%= @gsm_band %> cell_identity 1 location_area_code <%= @lac %> base_station_id_code 63 ms max power <%= @ms_max_power %> cell reselection hysteresis 14 rxlev access min 0 periodic location update 30 radio-link-timeout 32 channel allocator ascending rach tx integer 9 rach max transmission 7 channel-descrption attach 1 channel-descrption bs-pa-mfrms 5 channel-descrption bs-ag-blks-res 1 rach emergency call allowed 1 ip.access unit_id 1000 1 oml ip.access stream_id 255 line 0 neighbor-list mode automatic <% if @mncc_codec == 'AMR' -%>codec-support fr amr amr tch-h modes 4 5 amr tch-h start-mode 1 <% else -%>codec-support fr <% end -%> <% if @gprs == 'active' -%> gprs mode gprs gprs 11bit_rach_support_for_egprs 0 gprs routing area 0 gprs network-control-order nc0 gprs cell bvci 3 gprs cell timer blocking-timer 3 gprs cell timer blocking-retries 3 gprs cell timer unblocking-retries 3 gprs cell timer reset-timer 3 gprs cell timer reset-retries 3 gprs cell timer suspend-timer 10 gprs cell timer suspend-retries 3 gprs cell timer resume-timer 10 gprs cell timer resume-retries 3 gprs cell timer capability-update-timer 10 gprs cell timer capability-update-retries 3 gprs nsei <%= @lac %>1 gprs ns timer tns-block 3 gprs ns timer tns-block-retries 3 gprs ns timer tns-reset 3 gprs ns timer tns-reset-retries 3 gprs ns timer tns-test 30 gprs ns timer tns-alive 3 gprs ns timer tns-alive-retries 10 gprs nsvc 0 nsvci <%= @lac %>1 gprs nsvc 0 local udp port 23<%= @lac %> gprs nsvc 0 remote udp port 23001 gprs nsvc 0 remote ip <%= @sgsn_ip_address %> <% else -%> gprs mode none <% end -%> no force-combined-si depends-on-bts 0 trx 0 rf_locked 0 arfcn <%= @arfcn_B %> nominal power 37 max_power_red <%= @max_power_red %> rsl e1 tei 0 timeslot 0 phys_chan_config CCCH hopping enabled 0 timeslot 1 phys_chan_config SDCCH8 hopping enabled 0 <% if @gprs == 'active' -%> timeslot 2 phys_chan_config TCH/F hopping enabled 0 timeslot 3 phys_chan_config TCH/F hopping enabled 0 timeslot 4 phys_chan_config TCH/F hopping enabled 0 timeslot 5 phys_chan_config TCH/F hopping enabled 0 timeslot 6 phys_chan_config TCH/F hopping enabled 0 timeslot 7 phys_chan_config PDCH hopping enabled 0 <% else -%> timeslot 2 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 3 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 4 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 5 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 6 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 7 phys_chan_config <%= @phys_chan %> hopping enabled 0 <% end -%> <% end -%> <% if @bts2_ip_address -%> bts 2 type sysmobts band GSM850 cell_identity 2 location_area_code <%= @lac %> base_station_id_code 63 ms max power 33 cell reselection hysteresis 14 rxlev access min 0 periodic location update 30 channel allocator ascending rach tx integer 9 rach max transmission 7 channel-descrption attach 1 channel-descrption bs-pa-mfrms 5 channel-descrption bs-ag-blks-res 1 rach emergency call allowed 1 ip.access unit_id 1000 2 oml ip.access stream_id 255 line 0 neighbor-list mode automatic codec-support fr gprs mode none no force-combined-si trx 0 rf_locked 0 arfcn <%= @arfcn_C %> nominal power 37 max_power_red <%= @max_power_red %> rsl e1 tei 0 timeslot 0 phys_chan_config CCCH hopping enabled 0 timeslot 1 phys_chan_config SDCCH8 hopping enabled 0 timeslot 2 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 3 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 4 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 5 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 6 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 7 phys_chan_config <%= @phys_chan %> hopping enabled 0 bts 3 type sysmobts band GSM850 cell_identity 3 location_area_code <%= @lac %> base_station_id_code 63 ms max power 33 cell reselection hysteresis 14 rxlev access min 0 periodic location update 30 channel allocator ascending rach tx integer 9 rach max transmission 7 channel-descrption attach 1 channel-descrption bs-pa-mfrms 5 channel-descrption bs-ag-blks-res 1 rach emergency call allowed 1 ip.access unit_id 1000 3 oml ip.access stream_id 255 line 0 neighbor-list mode automatic codec-support fr gprs mode none no force-combined-si depends-on-bts 2 trx 0 rf_locked 0 arfcn <%= @arfcn_D %> nominal power 37 max_power_red <%= @max_power_red %> rsl e1 tei 0 timeslot 0 phys_chan_config CCCH hopping enabled 0 timeslot 1 phys_chan_config SDCCH8 hopping enabled 0 timeslot 2 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 3 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 4 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 5 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 6 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 7 phys_chan_config <%= @phys_chan %> hopping enabled 0 <% end -%> <% if @bts3_ip_address -%> bts 4 type sysmobts band GSM850 cell_identity 4 location_area_code <%= @lac %> base_station_id_code 63 ms max power 33 cell reselection hysteresis 14 rxlev access min 0 periodic location update 30 channel allocator ascending rach tx integer 9 rach max transmission 7 channel-descrption attach 1 channel-descrption bs-pa-mfrms 5 channel-descrption bs-ag-blks-res 1 rach emergency call allowed 1 ip.access unit_id 1000 4 oml ip.access stream_id 255 line 0 neighbor-list mode automatic codec-support fr gprs mode none no force-combined-si trx 0 rf_locked 0 arfcn <%= @arfcn_E %> nominal power 37 max_power_red <%= @max_power_red %> rsl e1 tei 0 timeslot 0 phys_chan_config CCCH hopping enabled 0 timeslot 1 phys_chan_config SDCCH8 hopping enabled 0 timeslot 2 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 3 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 4 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 5 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 6 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 7 phys_chan_config <%= @phys_chan %> hopping enabled 0 bts 5 type sysmobts band GSM850 cell_identity 5 location_area_code <%= @lac %> base_station_id_code 63 ms max power 33 cell reselection hysteresis 14 rxlev access min 0 periodic location update 30 channel allocator ascending rach tx integer 9 rach max transmission 7 channel-descrption attach 1 channel-descrption bs-pa-mfrms 5 channel-descrption bs-ag-blks-res 1 rach emergency call allowed 1 ip.access unit_id 1000 5 oml ip.access stream_id 255 line 0 neighbor-list mode automatic codec-support fr gprs mode none no force-combined-si depends-on-bts 4 trx 0 rf_locked 0 arfcn <%= @arfcn_F %> nominal power 37 max_power_red <%= @max_power_red %> rsl e1 tei 0 timeslot 0 phys_chan_config CCCH hopping enabled 0 timeslot 1 phys_chan_config SDCCH8 hopping enabled 0 timeslot 2 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 3 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 4 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 5 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 6 phys_chan_config <%= @phys_chan %> hopping enabled 0 timeslot 7 phys_chan_config <%= @phys_chan %> hopping enabled 0 <% end -%> mncc-int default-codec tch-f fr default-codec tch-h amr meas-feed destination 127.0.0.1 8888 nitb subscriber-create-on-demand no assign-tmsi smpp local-tcp-port 2775 policy closed smpp-first esme OSMPP no alert-notifications password <%= @smsc_password %> default-route esme ISMPP no alert-notifications password <%= @smsc_password %> esme NOTIFY password <%= @smpp_password %> no deliver-src-imsi