osmo-bsc: BTS dependent timeslot config.

Makes the timeslot config a little more complex. Supports configuring an Umsite
for FR only.

modules/rhizo_base/manifests/osmocom.pp

@@ -99,13 +99,64 @@ class rhizo_base::osmocom::common {
       require  => Class['rhizo_base::apt']
     }
 
-  $ts0_phys_chan = "CCCH"
-  $ts1_phys_chan = "SDCCH8"
 
-  if $mncc_codec == "GSM" {
+  $ts0_phys_chan = { "unknown"  => "CCCH",
-       $phys_chan = "TCH/F"
+                     "1002"     => "CCCH+SDCCH4",
-  } else {
+                     "1020"     => "CCCH+SDCCH4",
-       $phys_chan = "TCH/H"
+                     "2050M"    => "CCCH",
+                     "2050S"    => "CCCH",
+                     "UmSite"   => "CCCH",
+                     "UmSite1"  => "CCCH",
+                     "lime"     => "CCCH"
+                   }
+  $ts1_phys_chan = { "unknown"  => "SDCCH8",
+                     "1002"     => "TCH/F_TCH/H_SDCCH8_PDCH",
+                     "1020"     => "TCH/F_TCH/H_SDCCH8_PDCH",
+                     "2050M"    => "SDCCH8",
+                     "2050S"    => "SDCCH8",
+                     "UmSite"   => "SDCCH8",
+                     "UmSite1"  => "SDCCH8",
+                     "lime"     => "TCH/F_TCH/H_SDCCH8_PDCH"
+                    }
+  $ts7_phys_chan = { "unknown"  => "PDCH",
+                     "1002"     => "PDCH",
+                     "1020"     => "PDCH",
+                     "2050M"    => "PDCH",
+                     "2050S"    => "PDCH",
+                     "UmSite"   => "TCH/F",
+                     "UmSite1"  => "TCH/H",
+                     "lime"     => "TCH/F_TCH/H_SDCCH8_PDCH"
+                    }
+  $phys_chan_dyn = { "unknown"  => "TCH/F",
+                     "1002"     => "TCH/F_TCH/H_SDCCH8_PDCH",
+                     "1020"     => "TCH/F_TCH/H_SDCCH8_PDCH",
+                     "2050M"    => "TCH/F_TCH/H_SDCCH8_PDCH",
+                     "2050S"    => "TCH/F_TCH/H_SDCCH8_PDCH",
+                     "UmSite"   => "TCH/F",
+                     "UmSite1"  => "TCH/H",
+                     "lime"     => "TCH/F_TCH/H_SDCCH8_PDCH"
+                    }
+
+  if "AMR" in $mncc_codec {
+    $phys_chan = { "unknown"  => "TCH/H",
+                   "1002"     => "TCH/H",
+                   "1020"     => "TCH/H",
+                   "2050M"    => "TCH/H",
+                   "2050S"    => "TCH/H",
+                   "UmSite"   => "TCH/F",
+                   "UmSite1"  => "TCH/H",
+                   "lime"     => "TCH/H"
+                  }
+} else {
+    $phys_chan = { "unknown"  => "TCH/F",
+                   "1002"     => "TCH/F",
+                   "1020"     => "TCH/F",
+                   "2050M"    => "TCH/F",
+                   "2050S"    => "TCH/F",
+                   "UmSite"   => "TCH/F",
+                   "UmSite1"  => "TCH/F",
+                   "lime"     => "TCH/F"
+                  }
   }
 
   unless hiera('rhizo::local_osmobsc_cfg') == "1" {

modules/rhizo_base/templates/osmo-bsc-bts.erb

@@ -29,11 +29,14 @@
 <% end -%>
 <% if bts["lte_n"] -%>  si2quater neighbor-list add earfcn <%= bts["lte_n"] %> thresh-hi 4 thresh-lo 32 prio 7 qrxlv 32 meas 6
 <% end -%>
+<% if bts["model"] == "UmSite" -%>
+  codec-support fr
+<% elsif bts["model"] == "UmSite1" -%>
   codec-support fr amr
-<% if bts["model"] == "UmSite1" -%>
   amr tch-f modes 7
   amr tch-f start-mode auto
 <% else -%>
+  codec-support fr amr
   amr tch-f modes 3 5 6 7
   amr tch-f threshold ms 12 31 37
   amr tch-f hysteresis ms 4 4 4
@@ -107,34 +110,34 @@
    rsl e1 tei 0
    timeslot 0
 <% if index == 0 -%>
-    phys_chan_config <%= @ts0_phys_chan %>
+    phys_chan_config <%= @ts0_phys_chan[bts["model"]] %>
     hopping enabled 0
    timeslot 1
-    phys_chan_config <%= @ts1_phys_chan %>
+    phys_chan_config <%= @ts1_phys_chan[bts["model"]] %>
 <% else -%>
-    phys_chan_config <%= @phys_chan %>
+    phys_chan_config <%= @phys_chan[bts["model"]] %>
     hopping enabled 0
    timeslot 1
-    phys_chan_config <%= @phys_chan %>
+    phys_chan_config <%= @phys_chan[bts["model"]] %>
 <% end -%>
     hopping enabled 0
    timeslot 2
-    phys_chan_config <%= @phys_chan %>
+    phys_chan_config <%= @phys_chan[bts["model"]] %>
     hopping enabled 0
    timeslot 3
-    phys_chan_config <%= @phys_chan %>
+    phys_chan_config <%= @phys_chan[bts["model"]] %>
     hopping enabled 0
    timeslot 4
-    phys_chan_config TCH/F_TCH/H_PDCH
+    phys_chan_config <%= @phys_chan_dyn[bts["model"]] %>
     hopping enabled 0
    timeslot 5
-    phys_chan_config TCH/F_TCH/H_PDCH
+    phys_chan_config <%= @phys_chan_dyn[bts["model"]] %>
     hopping enabled 0
    timeslot 6
-    phys_chan_config TCH/F_TCH/H_PDCH
+    phys_chan_config <%= @phys_chan_dyn[bts["model"]] %>
     hopping enabled 0
    timeslot 7
-    phys_chan_config PDCH
+    phys_chan_config <%= @ts7_phys_chan[bts["model"]] %>
     hopping enabled 0
 <% end -%>
 <% end -%>